Transmitter Controls; Home Screen Display - Shure ADX3 Manual

Transmitter Controls

Use the controls to navigate menus and update settings.
Hold button to turn transmitter power on and off. Acts as a 'back' button to return to previous menus or pa­
X
rameters without confirming a value change.
O Enters menu screens and confirms parameter changes
∨∧
Use to scroll through menu screens and to change parameter values
Tip: Hold the ∧ button while powering on to enter safe start mode.

Home Screen Display

The home screen shows transmitter information and status.
There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of
the following choices:
• Name
• Frequency Setting
• Group (G) and Channel (C)
• Device ID
The following icons indicate transmitter settings:
Icon Setting
Battery runtime in hours and minutes or bar display
Key: Displayed when encryption is enabled
Lock: Displayed when controls are locked. Icon will flash if
access is attempted to a locked control (power or menu).
ShowLink signal strength displays 0 to 5 bars
Shure Incorporated
11/23