Table of Contents
Advertisement
Quick Links
RTS 4B4 LAGUNA SECA 4 LANE FOOTBRIDGE
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We have put hours of skill and more importantly love into this product and it is
wonderful to share our love for slot cars with you. May you enjoy the build and have
years of joy having it as part of your trackside diorama.
This product is a replica of the footbridge that can be found on the present day
WeatherTech Raceway, previously known as the Laguna Seca Raceway in
California, USA. Through the years various sponsors have decorated this bridge and
this kit is then also available in various liveries.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to
keep up to date with the latest developments and the launching of exciting new
products that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
WHAT IS IN THE KIT?
In this kit you will find all the laser cut pieced needed to assemble this product. The
pieces are still intact in the sheets as they were cut to ensure that all the parts are
there. Some of the loose bits inside pieces may have been removed, but they are not
part of the finished product. In the section "FAMILIARIZE YOURSELF" below, you
ASSEMBLY INSTRUCTIONS
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RTS 4B4 LAGUNA SECA 4
Summary of Contents for RTS 4B4 LAGUNA SECA 4
- Page 1 ASSEMBLY INSTRUCTIONS RTS 4B4 LAGUNA SECA 4 LANE FOOTBRIDGE CONGRATULATIONS Congratulations in choosing a unique product to enhance your slot car track diorama. This can truly be described as a product born from a love for slot cars. Buying this product have made you a member of a very special family, yes you are not dealing with a faceless business, but rather a family of slot car fanatics.
- Page 2 will find diagram(s) that identify and explain each piece (component) that you are about to assemble. In the section “PREPARING THE CUT PIECES” below, you will learn how to proceed to prepare the pieces for assembly. In the kit you will also find some optional pre-cut artwork printed on matt photo paper.
- Page 3 FAMILIARIZE YOURSELF Have a look at the photo of the finished product, in this photo with the Firestonel livery.
- Page 4 Now have a look at the next diagram where all the laser cut parts are shown and numbered from A to H and try to identify which is which and where they fit in. You will notice that the main bridge structure consists of two sides (A1-2) and a floor piece (B), as well as a top brace (E).
- Page 5 PREPARING THE CUT PIECES Firstly, remove all the laser cut parts from the sheets. The sheets can be discarded. Clean the edges of the parts if there are any tiny bits where the parts were fixed to the sheets. This can be done with your knife or even your thumb nail. We recommend that you start by sanding your finished product with a very light sandpaper to ensure a smooth finish for the end product.
- Page 6 LET’S GET STARTED WITH THE ASSEMBLY Place the one bridge side (A1) on your worksurface. Select the bridge deck (B) and glue the four nubs on one side of the deck into the corresponding slots in the bridge side (A1). Proceed to glue the nubs at the one side of the top brace (E) into the slots at the top of side (A1).
Need help?
Do you have a question about the 4B4 LAGUNA SECA 4 and is the answer not in the manual?
Questions and answers