Table of Contents
Advertisement
Push the lever forward
1.
7.7 Rack heights
Set the racks at the right height.
Appliance height 34" with silverware basket
Setting
1 max. ø
2 max. ø
3 max. ø
Appliance height 34" with silverware drawer
Setting
1 max. ø
2 max. ø
3 max. ø
Tip: If you remove the 3rd rack, you can place large items
of dishware in the lower rack.
8 Before using for the first time
Before using for the first time
Before using for the first time
8.1 Initial use
Before the first use, or after a factory reset, you will need
to configure the settings.
Tip: Connect your appliance to a mobile device. You can
conveniently change all settings using the
Home Connect® app.
→ "Home Connect® quick start", Page 25
Requirement: The appliance has been installed and
connected.
Add special salt.
1.
Add rinse aid. → Page 17
2.
Switch on the appliance.
3.
and fold down the tines
Upper rack
24 cm / 9.5"
26.5 cm / 10.5"
29 cm / 11.5"
Upper rack
18 cm / 7"
20.5 cm / 8"
23 cm / 9"
.
To use the tines again, fold them back up.
2.
a The tines click into position.
Lower rack
33 cm / 13"
30.5 cm / 12"
28 cm / 11"
Lower rack
33 cm / 13"
30.5 cm / 12"
28 cm / 11"
Set the water softening system.
4.
Set the amount of rinse aid.
5.
Add detergent.
6.
Start the Program with the highest cleaning temperature
7.
without dishware.
To remove any marks from water or other residues, we
recommend you operate the appliance without dishware
before using it for the first time.
Tip: You can change these settings and other Basic
settings at any time.
9 Water softening system
Water softening system
Hard water leaves limescale on dishware as well as the
Water softening system
washing tank, and parts of the appliance may become
blocked.
To ensure good dishwashing results, you can treat the
water with special salt and the water softening system. To
avoid damage to the appliance, water with a hardness
above 9 °E must be softened.
Before using for the first time en-us
15
Advertisement
Table of Contents
