Monitor Internet Traffic - NETGEAR MR90 User Manual

4. Select Attached Devices.
The Attached Devices page displays.
5. In the Connected Satellite table, find your satellite's IP address.
6. Launch a new web browser window and enter your satellite's IP address in the web
browser's address bar.
A login window opens.
7. Enter the same admin user name and password that you entered for the router.
The satellite status displays. The page displays information about the satellite
connections, hardware and firmware versions, and the WiFi networks in the 2.4 GHz
and 5 GHz bands.
8. To view detailed information about devices that are connected to the satellite
networks, select Attached Devices.
The Attached Devices page displays. For each device, the page displays the
connection type, IP address, device name, and MAC address.

Monitor Internet traffic

Traffic metering allows you to monitor the volume of Internet traffic that passes through
the router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
Manage your Router and
Satellite
Nighthawk Tri-band Mesh WiFi 6E
116 User Manual