Monitor Internet Traffic - NETGEAR DOCSIS C6230 User Manual

6. Specify the following parameters for the traceroute utility:
• Target. The IP address or host name of the computer you are tracing.
• Max Hops. The maximum number of hops to allow when tracing the route.
• Data Size. The input the size (in bytes) of the packet.
• Base Port. The port number to send the packet to.
• Resolve Host. Select On to resolve the host name to the IP address.
7. Click the Start Test button.
The traceroute results display.
8. To clear the results from the display, click the Clear Results button.

Monitor Internet Traffic

Traffic metering allows you to monitor the volume of Internet traffic that passes through
the cable modem router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1. Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2. Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
5. Select the Enable Traffic Meter check box.
6. Select the Traffic volume control by radio button and then select one of the following
options:
• No Limit. No restriction is applied when the traffic limit is reached.
• Download only. The restriction is applied to incoming traffic only.
• Both directions. The restriction is applied to both incoming and outgoing traffic.
Manage Your Network
C6230 WiFi Cable Modem Router
81 User Manual