Roc: Robot Operations Center; Pair A Phone To The Roc - Brain Corp ICE RS26 GEN2 Operational Manual

O
PERATION
ROC: R O
OBOT PERATIONS
BrainOS software provides access to Brain Corp's Robot Operations Center, also known as the ROC. The ROC
is a cloud-based robot operations center, managed by Brain Corp technicians, that enhances the machine's
abilities by providing monitoring and analytics. The ROC is connected via a 4G LTE modem and does not
require user interaction to connect. New versions of BrainOS software are automatically uploaded to the
machine without disrupting service or operator interaction.
There is a ROC indicator on the UI touchscreen's status bar. When the indicator is orange, the machine is
successfully connected to the ROC. If the indicator is gray, the ROC is not connected and cannot be paired with
a cell phone.
P P
AIR A HONE TO THE
Before running a cleaning route in robotic mode, it is recommended that the operator pair his/her cell phone
to the ROC. When a cell phone is paired to the ROC, the ROC will send SMS or MMS messages to the phone
whenever the machine encounters an alert and/or when the route is complete.
To ensure only the on site operator receives alerts from the ROC, only one phone can be paired to the ROC to
receive status alerts. A paired phone number is automatically discarded when the machine is turned off or a
new phone is paired.
Perform the following steps to pair a cell phone to the ROC:
1. Insert the ignition key and turn to the right
(clockwise) to turn on the machine. Wait for the
UI touchscreen to initialize.
2. Enter the 4-digit PIN via the UI touchscreen.
Upon successful PIN entry, the UI touchscreen
displays the Main Menu.
3. Select SETTINGS on the Main Menu.
4. Select NOTIFICATIONS.
5. Follow the instructions on the UI touchscreen to
pair the cell phone to the ROC.
24
V4.0119
• Content Subject to Change
C
ENTER
ROC
6. Pairing is successful when the cell phone
receives a confi rmation text message.