Honda ELECTRIC 2019 Owner's Manual page 508

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Pressure Relief Button
Repair Notification Label
■
Distributing the Sealant in the Tire
Speed Restriction Label
506
11. Press the pressure relief button until the
gauge returns 0 psi (0 kPa).
12. Apply the repair notification label to the
flat surface of the wheel.
u The wheel surface must be clean to
ensure the label adheres properly.
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes.
u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.