Honda ELECTRIC 2019 Owner's Manual page 124

uuGauges and Driver Information InterfaceuDriver Information Interface
■
Odometer
Shows the total number of miles or kilometers that your vehicle has accumulated.
■
Trip Meter
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the TRIP button. The trip meter
is reset to 0.0.
■
Outside Temperature
Shows the outside temperature in Fahrenheit.
■
Adjusting the outside temperature display
Adjust the temperature reading up to ± 5°F if the temperature reading seems
incorrect.
■
Average Energy Consumption
Shows the estimated average energy consumption of each trip meter in miles/kWh
or km/kWh. The display is updated at set intervals. When a trip meter is reset, the
average energy consumption is also reset.
122
1Trip Meter
Switch between trip meter A and trip meter B by
pressing the TRIP button.
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the audio/information screen's customized
features to correct the temperature.
2 Customized Features P. 296
1Average Energy Consumption
You can change when to reset the average energy
consumption.
2 Customized Features P. 296