D-Link DAP-1950 User Manual page 34

Section 3 - Configuration
Wireless - Smart Connect Disabled 2.4GHz Extended Wi-Fi
Status Enable or disable the 2.4 GHz network by toggling this slider.
Wi-Fi Name (SSID) This is the name of the DAP-1950's extended network. If
using Wi-Fi, the DAP-1950 will rebroadcast the uplink router's
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password Enter the password or network key that you wish to use for
the extended 2.4 GHz network.
Security Mode Choose WPA/WPA2-Personal (recommended) or WPA3-
Personal.
Schedule Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable or Always.
Wireless - Smart Connect Disabled 5GHz Extended Wi-Fi
Status Enable or disable the 5 GHz network by toggling this slider.
Wi-Fi Name (SSID) This is the name of the DAP-1950's extended network. If
using Wi-Fi, the DAP-1950 will rebroadcast the uplink router's
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password Enter the password or network key that you wish to use for
the extended 5 GHz network.
Security Mode Choose WPA/WPA2-Personal (recommended) or WPA3-
Personal.
Schedule Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable or Always.
D-Link DAP-1950 User Manual
YourRouter
YourRouter
31