Handlebar Switches - Yamaha YFZ450R 2017 Owner's Manual

If the warning light does not come on initially when
the key is turned to "
light remains on, have a Yamaha dealer check the
electrical circuit.
EBU18067

Handlebar switches

1
2
3
1. Light switch " / /OFF"
2. Engine stop switch " /
3. Start switch " "
EBU18081
Engine stop switch "
Set this switch to " " before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
" (on), or if the warning
"
/ "
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
EBU18157
Light switch "
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
ECB00046
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter will not have enough power to crank the
engine. If this should happen, remove the bat-
tery and recharge it. (See page 8-42.)
4-3
".
/ /OFF"
" to turn on the low beams
" to turn on
4