1. Positive battery lead (red)
2. Negative battery lead (black)
3. Install the battery holding plate by installing
the bolts.
4. Install the seat. (See page 4-10.)
TIP
Make sure the positive and negative battery
leads are installed as shown.
Fully charge the battery before installing it.
1
2
8-45
EBU29962
Replacing the fuse
1
2
1. Fuse
2. Spare fuse
The fuse holder is located under the seat. (See
page 4-10.)
If the fuse is blown, replace it as follows.
1. Turn the key to "
trical circuits.
ECB00641
NOTICE
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
" (off) and turn off all elec-
8