Table of Contents
Advertisement
Operations
Control panel
01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Options
07 Smart Control
08 Navigation
buttons
09 Power
10 Start/Pause
32
English
Untitled-12 32
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press and hold for 3 seconds to turn on/off the Drum Light.
The drum light turns off automatically after 2 minutes.
Press to change the rinse count for the current cycle. You can set
the rinse count to a max of 5, depending on the cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold: The final rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a
drain or spin process.
• No Spin: The drum does not rotate after the final drain process.
• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
Press to enter the Options screen.
Press to turns on Smart Control. If Smart Control turns on, the
washing machine can be controlled on a mobile device.
Press and hold for 3 seconds to enter the Settings screen.
Use to navigate through the menus or to adjust the value of the
settings.
Press to turn on/off the washing machine.
Press to start or stop operation.
02
03
04
05
09
08
10
06
07
11/15/2017 2:38:04 PM
Advertisement
Table of Contents
