Table of Contents
Advertisement
Oy-X-JTe
larch dlerem dala ke) fc)
Playing Time — Time Edit
Playing Repeatedly —
To add selection(s) -LINK-
After all selections on the disc have been programmed, if
there is the selection that fit in the remaining time, "LINK"
and the selection numbers will blink.
To add selection, press EDIT/TIME FADE again. A program
will be made automatically to fit the playing time as close as
possible to the remaining time.
If the remaining time can contain other selection(s), "LINK"
and the selection number keep blinking. When "LINK"
blinks, if the disc is changed by another disc, the new
selection number(s) on the new disc that fit in the remaining
time will blink.
*EDIT* disappears when the playing time becomes equal to
the designated time. Whether "LINK* is blinking or not, you
can change the disc by another disc and choose
selection(s) to fit the remaining time.
To play the program
Press >.
The selections for side A will be played and then the unit will
pause. "B" lights up in the tape side indicator. Set the tape
to the beginning of side B, then press > or 02.
The selections for side B will be played.
Note
Playback can be performed when "EDIT" is displayed.
To stop playback
Press @.
You can play the same program repeatedly as long as you
do not cancel time edit or erase the program.
To cancel time edit
Press CONTINUE and return to the continuous playing
mode.
The program will be erased.
To erase the entire program
Press ™ once during stop; twice during playback.
The program is also erased, when you turn off the unit.
To include desired selections in the program
1 Make your own program of the desired selections.
See page 17 for instructions.
2 Follow the procedure as shown on the preceding page.
Just designate the length of your tape, and you need not
to subtract the playing time of your program. The unit will
place your selections at the beginning of its program and
add other selections to fit the remaining time.
20
Repeat Play
Press REPEAT before or during playback.
REPEAT
In the 1 DISC mode, press REPEAT so that "REPEAT'
appears on the display. The unit repeats all selections of
adisc. Press REPEAT so that "REPEAT 1° appears. The
unit repeats one selection.
In the ALL DISCS mode, Press REPEAT so that
"REPEAT* appears on the display. The unit repeats all
selections of all discs. Press REPEAT so that "REPEAT
1° appears. The unit repeats one selection.
To cancel repeat play
Press REPEAT until REPEAT' disappears.
Advertisement
Table of Contents
