Related Manuals for Hyundai power products HDCBE1400
Summary of Contents for Hyundai power products HDCBE1400
- Page 1 ELECTRIC BRUSHCUTTER & GRASSTRIMMER HDCBE1400 WARNING: Read thoroughly the instruction manual before use...
-
Page 2: Safety Warnings
1.SAFETY WARNINGS Safe operating practices Training a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine. b) Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict the age of the operator. - Page 3 g) Always disconnect the machine from the power supply (remove the plug from the mains): 1.whenever the machine is left unattended; 2.before clearing a blockage; 3.before checking, cleaning or working on the machine; 4.after striking a foreign object; 5.whenever the machine starts vibrating abnormally. h) Take care against injury to feet and hands from the cutting means.
- Page 4 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 5 could become entangled in the nylon cutting head. Also remove any objects that the unit may throw during cutting. Keep children away. Onlookers should be kept at a safe distance from the work area, at least 15 meters (50 FEET). ...
- Page 6 protector or cutting attachment, be sure to stop the engine and confirm that the cutting device has stopped running. The engine should be turned off when the machine is moved between work areas Be careful not to hit the nylon cutting head against stones, or the ground.
- Page 7 not smoking. Limit the hours of operation. Try to fill each day with jobs where operating the brush cutter or other hand-held power equipment is not required. If you experience discomfort, redness and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.
-
Page 8: Kickback And Related Warnings
Walk on slopes, never run WARNING: Never to touch moving hazardous parts before the machine is disconnected from the mains and the moving hazardous parts have come to a complete stop WARNING: Never to connect a damaged cord to the supply or touch a damaged cord before it is disconnected from the supply. -
Page 9: Residual Risks
a) Never place your hand near the rotating accessory. Accessory may kickback over your hand. b) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging. - Page 10 READ & UNDERSTAND Operator’s Manual and Safety Manual ALWAYS WEAR EYE PROTECTION, EAR PROTECTION AND HEAD PROTECTION. GUARANTEE SOUND POWER LEVEL Distance between bystanders and the tool must be at least 15m People must kept away from the work area Do not expose to rain and humidity Be careful to the rebound Caution: If the electrical cable is damaged, please immediately switch off the power...
- Page 11 Intended use This machine can be used with the cutting wire as a trimmer for cutting grass and weeds of small thickness and in small quantity and with the cutting blade as a brush cutter for cutting denser vegetation. This machine must not be used for cutting or other cutting operations where the cutting tool must be lifted above the ground.
- Page 12 Technical data Model HDCBE1400 Power 1400 W Voltage 230V~50Hz Speed (brushcutter) 8500 /min Cutting diameter (brushcutter) 255mm Thickness cutting (brushcutter) 1.4mm Speed (grass trimmer) 7200 /min Cutting diameter (grass trimmer) 420mm Cutting thickness (grass trimmer) Φ1.6mm Weight) 5.2 kg Sound pressure level LpA : 75 dB(A) ;...
- Page 13 Before working on the device, disconnect it from the power supply. Use only original parts and be careful when assembling the brushcutter. Risk of injury! Before working, you must mount the safety guard on the cutting device, and the two tubes. Assemble the tool as explained below and use the pictures above.
- Page 14 Make sure the wiring is not bent or broken. MOUNTING THE CARTER OF PROTECTION (FIG 4) Place the protective cover on the shaft. Screw the Allen screws as shown. MOUNTING THE METAL CUTTING BLADE (FIG 5) when working with the metal cutting blade, wear gloves. 1.
- Page 15 3. To stop, release the M / A button (A). Switching for continuous operation is not possible. After turning the unit off, the head continues to run for several seconds. The M / A switch must not be locked. When released, the engine must stop. If the switch is damaged, do not continue working with the machine.
- Page 16 impacts with stones, metal or other obstacles. The blades could be damaged and there is a risk of retro-shock. • Inspect the damaged blades regularly and replace if necessary. • Do not use the appliance to cut rejects or thickets. •...
- Page 17 SERVICE AND SPARE PARTS Have your appliance checked by qualified personnel using original parts. This will ensure the safety of the tool. If you require technical advice, repairs or genuine parts, contact the SWAP service nearest you. For information or places of service, go to: www.swap-europe.com. When ordering spare parts, please indicate the part number, you can find them at: www.swap-europe.com.
- Page 18 Tel : +33 (0)5.34.502.502 Fax : +33 (0)5.34.502.503 declares that the machines: ELECTRIC BRUSHCUTTER &GRASSTRIMMER Model: HDCBE1400 Serial No.: 20211235760-20211236459 have been designed in compliance with the following standards: EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019; EN 50636-2-91:2014 EN62233:2008 ; EN 55014-1:2017 ; EN ISO11806-1: 2011 EN 55014-2:2015 ;...
-
Page 19: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 20: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 21: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the HDCBE1400 and is the answer not in the manual?
Questions and answers