Subscribe to Our Youtube Channel
Related Manuals for Hyundai power products HY2187
Summary of Contents for Hyundai power products HY2187
- Page 1 20V Cordless Grass Trimmer HY2187 Instruction Manual WARNING: Read the instructions carefully before use.
-
Page 2: Table Of Contents
Contents Introduction……..……………………………3 Technical Data…………......32 Safety Information…..…………………..4-13 Recycling And Disposal..………………...33 Understand Your Machine.…..…………...4 Personal Safety...…….……………………4-5 Declaration Of Conformity…..…………..34 Inspect Your Machine…………………..5 Work Area…….……………………………..6 Useful Information…..……………………..35 During Use…….………………………………7 Our YouTube Channel…..………………..35 Batteries…….…………………………………8 Warranty…………………………………….35 Charger………………………………………..8 Manual Updates….……………………….35 Electricity…….………………...…………...8-9 Returning Your Product….……………….35 Double Insulated Devices…..……..9 Leaving A Review….……………………...35 Vibrations….…………………………..10 Ordering Spare Parts.……………………..35... -
Page 3: Introduction
THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. -
Page 4: Safety Information
Safety Information Understand Your Machine • WARNING! You must read these instructions carefully before operating the machine. Make sure that you are familiar with the controls and properly operate the machine. You must learn how to stop the machine quickly. If you do not follow the warnings and instructions, it may result in fire and/or serious injury. -
Page 5: Inspect Your Machine
Safety Information Personal Safety (Continued) • Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service. • Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations. -
Page 6: Work Area
Safety Information Work Area • You must only work in daylight or with good artificial light in good visibility conditions. Do not work at night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the area. -
Page 7: During Use
Safety Information During Use • Do not operate the machine in confined areas where there may be a risk of crushing the operator between the machine and another object. • Never attempt to make any adjustments, while the machine is running. •... -
Page 8: Charger
Safety Information Batteries Batteries present a risk if they become damaged by the possible leaking of electrolyte. Electrolyte is an acid and can cause serious burn injuries. Care should be taken when working on or near them. NOTE: the electrolyte may be in a liquid or gel form. -
Page 9: Double Insulated Devices
Safety Information Electricity (Continued) • Power tools plug must match the outlet. Never modify the plug in any way. DO NOT use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. •... -
Page 10: Residual Risks
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 11: Intended Use
Safety Information Intended Use The HY2187 is a 20V Cordless Grass trimmer. It is powered by a 775W HYUNDAI motor. This machine is specifically a pedestrian tool, manufactured according to the latest safety requirements. Every precaution is only effective when it’s followed exactly. -
Page 12: Personal Protective Equipment
Safety Information Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. No protective equipment can ensure 100% protection. When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. -
Page 13: Symbols On The Machine
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgement. - Page 14 2. Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately. 3. You must keep the packaging material in case the machine needs to be returned or repaired.
-
Page 15: Unboxing
Unboxing *Not To Scale Front Guide 20V 2.0Ah Lithium Ion Battery Battery Charger Adjustment Collar Edging Wheel Auxiliary Handle Handle Adjustment Knob Trimmer Head Rotation Collar Power Safety Button On/Off Trigger Battery Carriage Trimmer Head Angle Button Trimmer Guard Spool Head Battery Charge Indicator Battery Release Button Feature Descriptions on next... -
Page 16: Features
Features Front Guide – This is used when cutting near Flower beds and fences. It prevents damage from the spool Adjustment Collar – Used to Extended the tube Auxiliary Handle – An additional grip Handle Adjustment Knob – Use to adjust Auxiliary handle Power Safety Button –... -
Page 17: Attach Edging Wheel
Assembly Attach Edging Wheel Warning : Ensure the Battery is not attached during Assembly Insert the Edging Wheel (O) onto the Trimmer Head. Secure it into place with 2 screws www.hyundaipowerproducts.co.uk... -
Page 18: Assembly
Assembly Attach Trimmer Guard Insert the Trimmer Guard (I), lining up the screw holes. Insert a screw into the hole, and secure until tight. *Note* - Double check the trimmer head is secured, shake it gently to ensure it stay in place. www.hyundaipowerproducts.co.uk... -
Page 19: Front Guard And Auxiliary Handle
Assembly Attach Front Guard and Auxiliary Handle Insert the Front Guard (A) into it’s guided slot. Either side of the Trimmer Head is a guide where the Front Guard sits. Put the Auxiliary handle (C) onto it’s seat. Insert the large bolt from the left hand side, and secure with the hand nut on the opposite side. -
Page 20: Insert Battery
Assembly Insert Battery Ensure battery is fully charged before assembly, see page 21. Insert the Battery (M) with the Battery Release Button (L) facing away from the Battery Carriage (G). An audible *click!* will be heard when it’s secured into place. To Remove, press the Battery Release Button (L) and out the battery away from the machine. -
Page 21: Battery Charger Operation
Operation Battery Charger Operation Ensure the power source switch is OFF when plugging in Battery Charger You MUST understand the whole Instruction Manual before any operation Slide the Battery (M) into the Battery Charger (N), by lining up the terminals on both. It will be secured with an affirmative *click!*. NOTE –... -
Page 22: Operation
Machine Adjustment Before Operation, you MUST read and understand the whole User Manual The HY2187 has adjustable for all heights of user. Use the Adjustment Collar (B), to extended the telescopic shaft of the machine. Loosen the collar, extended to preferred length and then secure by tightening the collar. -
Page 23: Edging Wheel Use
Operation Edging Wheel Use The Trimmer Head Rotation Collar (P) is used to rotate the Trimmer head for the Edging wheel use. Pull the whole trimmer head downward, this will open up the Trimmer Head Rotation Collar (P), allowing the trimmer head to rotate. -
Page 24: Stopping And Starting
Operation Stopping and Starting When using the HY2187, the machine required use of both hands. Ensure the Auxiliary handle is in a comfortable position. Loosen the hand nut on the Auxiliary handle, and adjust to preferred position. Secure by tightening the hand nut. -
Page 25: Tips For Use
Operation Tips For Use After reading the safety instructions carefully, follow the instructions below attentively in order to get the most out of your grass trimmer. 1. Start off slowly, when you have gained experience, you will be able to use the grass trimmer to its full potential. -
Page 26: Maintenance & Care
Maintenance & Care General Maintenance WARNING : Turn OFF the machine, allow all moving parts to come to a complete stop, and disconnect the power cord before maintaining the machine. You need to wear proper clothing and protective gloves whenever your hands are at risk. -
Page 27: Replacing Trimmer Line
Maintenance & Care Replacing Trimmer Line We recommend using 1.3mm, 1.4mm or 1.5mm nylon grass trimmer line. WARNING : Make sure the battery is disconnected. 1. Turn the trimmer so that the cutting head is facing upwards. Squeeze the two tabs on the spool cover. - Page 28 Maintenance & Care Replacing Trimmer Line (Continued) 5. Clip the trimmer lines onto the reel as shown. See image 5. 6. Thread the trimmer line through the holes in the spool body. Slide the reel onto the drive shaft. See image 6. Image 5 Image 6 7.
-
Page 29: Replacing Spool
Maintenance & Care Replacing Spool Spare Spool Part Number : 1317019 WARNING : Make sure the battery is disconnected. 1. Turn the trimmer so that the cutting head is facing upwards. Squeeze the two tabs on the spool cover. See image 1. 2. - Page 30 Maintenance & Care Replacing Spool (Continued) 4. On the new spool, free both ends of the line. Thread both ends of the line through the holes on the spool body with the smooth side with the arrow facing upwards. Make sure the ends of the line do not slip out of the holes. See image 4. 5.
-
Page 31: Snapped Line
Maintenance & Care Snapped Trimmer Line If the trimmer line breaks or snaps and is not long enough, you can manually extend the trimmer line. 1. There is a small button (see diagram). You can press this button and then pull the line out 1cm. -
Page 32: Technical Data
Technical Data Machine Specification Model HY2187 Motor Rated Power 775W No Load Speed 8000 RPM Cutting Width 25cm Voltage www.hyundaipowerproducts.co.uk... -
Page 33: Recycling And Disposal
Recycling & Disposal Recycling & Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 34: Declaration Of Conformity
Importer and Authorised Representative Genpower Ltd Isaac Way, Pembroke Dock, SA72 4RW China Country of Origin: 20V Cordless Grass Trimmer Description: HY2187 SKU Code: 17/12/2021 Date of Issue: Regulations and Directives of Compliance • 2006/42/EC The Machine Directive • 2014/30/EU EMC Directive •... -
Page 35: Useful Information
Go to YouTube and search ‘Hyundai Power Products’. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. Should you find an error, omission or something unclear, please contact us for assistance. -
Page 36: Product Record
Product Record Information As soon as you have purchased the machine, we recommend that you fill out the following. If you need to contact an authorised dealer or customer service for information on servicing, you may need to provide the following information. Date Of Purchase:……………………………………………………………………………….. -
Page 37: Notes
Notes www.hyundaipowerproducts.co.uk... - Page 38 Notes www.hyundaipowerproducts.co.uk...
-
Page 39: Contact Us
Contact Us Need Help? Talk To Our Experts Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Post Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Hyundai Support Website Go to hyundaisupport.co.uk www.hyundaipowerproducts.co.uk... - Page 40 Importer: GENPOWER LTD Isaac Way, London Road, Pembroke Dock, UK, SA72 4RW. T: +44 (0) 1646 687 880 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported / Distributed by Genpower Ltd for the United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...
Need help?
Do you have a question about the HY2187 and is the answer not in the manual?
Questions and answers