Fiat PANDA Owner's Handbook Manual page 19

Hide thumbs Also See for PANDA:
Table of Contents

Advertisement

SIDE LIGHTS / DAYTIME
RUNNING LIGHTS (DRL)
"Daytime Running Lights"
(for versions/markets, where provided)
16) 17)
With the ignition key in the MAR
position and the ring A fig. 17 turned to
the
position, the daytime lights switch
on automatically, while the other lights
and the internal lighting remain off.
SIDE LIGHTS / DIPPED
BEAM HEADLIGHTS
With the ignition key turned to MAR,
turn ring nut A fig. 17 to
. If dipped
beam headlights are activated, the
daytime running lights switch off and
the side lights and dipped headlights
switch on. The
warning light
switches on in the instrument panel.
PARKING LIGHTS
All of the side lights, number plate lights
and parking lights can only be turned
on by moving the ring A fig. 17 first
to the
position and then to the
position with the ignition key in the
STOP position or removed.
The
warning light switches on in
the instrument panel.
To switch off the parking lights, turn the
ring A from the
position to the
position. Warning light
off in the instrument panel.
MAIN BEAM HEADLIGHTS
To switch on the main beam headlights,
pull the stalk towards the steering
wheel beyond the end of travel click
with ring A fig. 17 in the
and the ignition device in the MAR
position. The
instrument panel turns on.
When the stalk is pulled towards the
steering wheel again, beyond the end
of travel position, the main beam
headlights deactivate, the dipped beam
headlights reactivate and the
warning light switches off.
FLASHING
To do this, pull the stalk towards the
steering wheel (unstable position),
regardless of the position of ring nut A
fig. 17. The
instrument panel turns on.
DIRECTION INDICATORS
Place the lever in the (stable) position:
upwards: activates the right
direction indicator;
downwards: activates the left
direction indicator.
The
or
warning light will blink on
the instrument panel. The direction
indicators switch off automatically when
the steering wheel is straightened.
switches
"Lane Change" function
If you wish to signal a lane change,
place the left stalk in the unstable
position for less than half a second. The
position
direction indicator on the side selected
will be activated for 5 flashes and
warning light on the
then go out automatically.
"FOLLOW ME HOME"
DEVICE
This allows the space in front of the car
to be lit for a set time.
Activation: with the ignition key on
STOP or removed, pull the stalk
towards the steering wheel within 2
minutes from when the engine is turned
off.
Each time the stalk is moved, the lights
stay on for an extra 30 seconds up to
a maximum of 210 seconds; then
warning light on the
the lights are switched off automatically.
Each time the stalk is operated, the
panel switches on and the display also
shows a message and how long the
function will remain active.
The
the stalk is first operated and stays on
until the function is automatically
deactivated. Each time the stalk is
activated it increases the time that the
lights remain on.
warning light on the instrument
warning light comes on when
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents