Table of Contents
Advertisement
3. To secure the Antenna Feed to the Dish Reflector:
a. Replace the knob and tighten it by hand until the knob
touches the surface of the Mounting Bracket.
b. Use a wrench or channel lock pliers to tighten the knob
an additional ¼ turn. Do NOT over-tighten the knob.
Note:
attached by the knob.
Important:
Feed once the feed is attached.
Ensure that the Antenna Feed is securely
Do not handle the RocketDish by the Antenna
*640-00148-03*
640-00148-03
Advertisement
Table of Contents
