Ubiquiti RocketDish RD­5G34 Quick Start Manual

Ubiquiti RocketDish RD­5G34 Quick Start Manual

Hide thumbs Also See for RocketDish RD­5G34:

Advertisement

Quick Links

RD­5G34 Quick Start Guide
Package Contents
Dish Reflector
Antenna Feed
Mount Bracket
Protective Shroud
Pole Clamps (Qty. 2)
Stabilizer Brackets (Qty. 2)
RF Cables (Qty. 2)
Elevation Rod
M12x180 Carriage Bolts (Qty.
4)
M10x100 Bolts (Qty. 2)
M10x25 Carriage Bolts (Qty.
M4 Screws (Qty. 6)
3)

Advertisement

Table of Contents
loading

Summary of Contents for Ubiquiti RocketDish RD­5G34

  • Page 1 RD­5G34 Quick Start Guide Package Contents Dish Reflector Antenna Feed Mount Bracket Protective Shroud Pole Clamps (Qty. 2) Stabilizer Brackets (Qty. 2) RF Cables (Qty. 2) Elevation Rod M12x180 Carriage Bolts (Qty. M10x100 Bolts (Qty. 2) M10x25 Carriage Bolts (Qty. M4 Screws (Qty. 6)
  • Page 2: Installation Requirements

    Installation Requirements 5 GHz Rocket® radio (sold separately) Phillips #1 screwdriver 16 mm or 5/8" wrench 24 mm wrench Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial­grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable Hardware Installation IMPORTANT: Handle the Dish Reflector with care. Deformations in its shape may reduce the antenna’s effectiveness. 1.  IMPORTANT: Do not handle the antenna by the Antenna Feed once the...
  • Page 3 IMPORTANT: Do not handle the antenna by the Antenna Feed once the feed is connected. 2.  3. ...
  • Page 4 4.  5. ...
  • Page 5 6.  7.  8.  9. ...
  • Page 6 10.  11. ...
  • Page 7 12.  13.  14. ...
  • Page 8 14.  15. ...
  • Page 9 16.  17. ...
  • Page 10: Specifications

    Specifications RocketDish RD­5G34 Dimensions 1050 x 1050 x 421 mm (41.34 x 41.34 x 16.57") Weight 13.5 kg (29.76 lb) Frequency 5.1 ­ 5.9 GHz Gain 34 dBi HPOL Beamwidth 3° (3 dB) VPOL Beamwidth 3° (3 dB) Front­to­Back Ratio ­42 dB Max. VSWR 1.7:1 Wind Survivability 200 km/h...
  • Page 11: Safety Notices

    RocketDish RD­5G34 (125 mph) Wind Loading 1,779 N @ 200 km/h (400 lbf @ 125 mph) Polarization Dual Linear Cross­Pol Isolation 35 dB Min. Mounting Universal Pole Mount, Rocket Bracket, and Weatherproof RF Jumpers Included Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance RF Exposure Warning The antenna and transmitter must be installed to provide a separation distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. For the specific separation distance, refer to the Quick Start Guide for your Rocket device (transmitter). L’antenne et l’émetteur doit être installé pour fournir une distance de séparation de toute les...
  • Page 12: Declaration Of Conformity

    WEEE Compliance Statement Declaration of Conformity Online Resources © 2021 Ubiquiti Inc. All rights reserved.

Table of Contents