Installation; Cleaning And Care; Repair And Spare Parts - Nave FUMOSO Manual

Installation

Electric shock
Disconnect the mains voltage or mains plug before starting work.

Make sure that no hazards can be caused by electrically conductive objects or media.

Make sure that the type of electrical installation does not reduce the protection against electric shock

(protection class, protective insulation).
Make sure that the cable is not bent excessively or crushed.

Non-compliance with these instructions will result in serious or fatal injury.

Cleaning and care

Damage to the product
Do not use any solvents for cleaning.

Non-compliance with this instruction can cause damage to property.
Only clean the product when it is switched off and has cooled down.

Limit the care of luminaires to the surface only.

Prevent moisture from getting into connection compartments or on live parts.

Use a soft, dry cloth for cleaning.


Repair and Spare parts

Unsuitable parts
Use original spare parts and accessories from the manufacturer only.

Non-compliance with this instruction can cause damage to property.
In case of complaint, contact your responsible specialist dealer or contact our service hotline directly.
Telephone number: +49 (0)7947 9100-0

E-mail: info@naeve.de

For technical questions, please state the order number (e.g. 16648). The order number can be found on the type
plate.
2087122_Manual_16903_02_V1
DANGER
NOTE
NOTE
7 / 26