Scope Of Delivery; Installation - Nave 3D-STERNE Manual

Designation
Mains cable length
Material
Product material
Protective measures
Protection rating
Protection class
Functions
Mains operation
Total performance: watts
Total performance: lumens
Supply voltage
Frequency
Additional functions
Timer
Weight
Product weight
Illuminant
Excluded
Non-replaceable
Kelvin
Rated output duration
Connection type
Connector
Switches

Scope of delivery

Operating instructions

Lights


Installation

Electric shock
Disconnect the mains voltage or mains plug before starting work.

Do not unplug the mains plug by pulling the cable, always take hold of the mains plug directly.

Make sure that no hazards can be caused by electrically conductive objects or media.

Make sure that the type of electrical installation does not reduce the protection against electric shock

(protection class, protective insulation).
Make sure that the cable is not bent excessively or crushed.

Non-compliance with these instructions will result in serious or fatal injury.
5308315_Manual_16869_03_V2
Unit Value
cm 500
- Plastic
IP 44
PC II
- -
W 3,6
lm 20
V~ 220–240
Hz 50
- 6/18
kg 0,345
- -
- -
K 2500-2700
h 50,000
-
-
-
-
DANGER
7 / 37
Pictogram Explanation
-
- -
Protected against contact with tools and
wires (diameter ≥ 1 mm).
Protected against water splashed from all
sides.
This product is specially insulated and must
not be connected to the protective earth
conductor.
-
-
Light intensity
Input voltage
-
Switches the luminaire on/off at a defined
time
- -
-
- -
Colour temperature (warm white)
-
- Safety plug
- Press key