Adjusting The Video Rate - Sony LF-B20 Settings Manual

Type
Zoom The image is shown at full screen
size without changing proportions,
while cutting off the top and bottom
areas.
Full Screen The image is shown in the full screen
size by changing proportions and
zooming in horizontally and
vertically.
Original The image is shown in the original
size.
Normal The image is adjusted to fit the PSP
system's screen size.

Adjusting the Video Rate

Adjusts so that you see an optimized image
depending on network conditions.
Normally, selecting [Automatic] sets the optimal
video rate in accordance with available
bandwidth.
When selecting a rate manually, a higher rate (a
larger number) results in better picture quality but
also requires larger bandwidth. Note that
insufficient bandwidth may cause the video to
stop intermittently.
1
Select from the control panel, and
then press the
The screen for selecting a rate is displayed.
2
Using the directional buttons, select
the desired rate, and then press the
button.
The rate is changed.
Description
®
button.
z
Tip
Depending on the selected rate, the network
connection may drop during the cutover to the
new rate.
Displaying Information about
the Video Input or TV Channel
in Use
1
Select from the control panel, and
then press the
Video input information is displayed. When
watching TV with LF-PK1 or LF-X11,
channel information is displayed.
Video input/channel information
17
button.