Sony LF-B20 Settings Manual page 20

Skip If you select [Yes], the channel
will not be displayed on the
PSP
channels with the PSP
system's directional buttons or
the +/– buttons on the remote
control.
When you have completed making settings
for all channels, press the right button.
6
Save your settings.
Press the button to save the channel
information you entered on the PSP
system.
Adjusting Settings for the
Remote Control of a
Connected Device
You can adjust settings for the on-screen remote
control that will be used to operate devices such
as video decks or DVD players that are connected
to the Base Station.
To adjust these settings, you must first save
remote control data on Memory Stick Duo™
media (1 page 15).
For information on connecting the IR blaster or
other devices, refer to the Operating Instructions
document of the Base Station.
1
Check that you have inserted Memory
Stick Duo™ media that contains
remote control data in the PSP
system.
2
Select from the LocationFree
Player control panel (1 page 14), and
then press the
3
Select [Remote Control Settings], and
then press the
The setting screen for the remote control is
displayed.
system when changing
®
®
®
®
button.
button.
4
Select [Video 1] or [Video 2] for the
connected device you want to use the
remote control for, and then press the
button.
z
Tips
• Under [Version Information], you can check
the version number of the remote control data
that is saved on the Memory Stick Duo™.
• You can set only one remote control each for
[Video 1] and [Video 2] in the PSP
You cannot however set multiple remote
controls for either setting.
5
Select the manufacturer of the
connected device, and then press the
right button.
z
Tip
To select the remote control data learned by LFA-
PC20, copy the remote control data following the
instructions on "Using the learning remote
control data" (1 page 16), and then select
[custom remote] as the manufacturer.
20
system.
®