Sony LF-B20 Settings Manual page 13

Preparing for using the public
wireless LAN service
Create the network settings to use the public
wireless LAN service.
Refer to the instructions for the PSP
do the necessary settings. The settings such as
SSID and security will depend on the public
wireless LAN provider you use. For details, refer
to the website or other documents of the provider
you intend to use.
However, to use the LocationFree Player via a
public wireless LAN service, create the following
settings.
• Select [New Connection] under
home menu to create the network settings.
• Set [Address Settings] to [Custom].
• Set [Internet Browser] to [Start].
1
Check that an access point from a
public wireless LAN service is
available nearby.
Depending on the service provider, access
point availability or connection method may
vary.
2
Turn on the WLAN switch of the PSP
system.
3
Select under
menu, and then press the
A list of network settings is displayed.
4
Select a connection from the list of
network connections, and then press
the button.
Select the connection for the public wireless
LAN service to be used.
Connection to the Base Station over the
Internet begins.
system to
®
from the
®
from the home
button.
13
5
The TV or video picture is displayed.
When a connection is established, the TV
picture (LF-PK1/LF-X11) or the video
picture (LF-B20/LF-B10) is displayed.
Note
No connection will be established if the Base
Station, router, modem and other devices are not
turned on.
Closing the LocationFree Player
1
Press the button during TV or
video playback.
A confirmation screen is displayed.
2
Select [Yes], and then press the
button.
The LocationFree player closes.