3. Scroll to POIs (Points of interest) using [Light Lock] and select
with [Next].
The watch displays the number of saved POIs and free space
available for new POIs.
4. Scroll to the POI you wish to navigate to with [Start Stop] or
[Light Lock] and select with [Next].
5. Press [Next] to select Navigate.
If you are using the compass for the first time, you need to
calibrate it (see
compass, the watch starts searching for a GPS signal and displays
GPS found after acquiring the signal.
6. Start navigating to the POI. The watch displays the following
information:
•
indicator showing the direction to your target (see further
explanation below)
•
your distance from the target
7. The watch informs you that you have arrived at your target.
3.6.2 Calibrating compass ). After activating the
61