Page 1
TXG916 Core Products are proud to be a member of ACID (Anti Copying in Design). Our designs are supported through their intellectual property databank. All copyright, design rights & intellectual property rights existing in this product, instructions and related documents are and will remain the property of Core Products.
Page 3
TXG916 115min P3 Thank you for choosing this furniture. BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can acclimatise. PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY. Information about your Pine furniture.
Page 5
Ensure the drawer runner side with 2 holes for dowels part 04 is facing towards the top of the panel. TOP OF PANEL 180º. TOP OF PANEL 180º. x02 J 14mm 28mm 25mm Ø3,5 Ø4,5 Ø8 GOLD GOLD Build your furniture on a soft clean BACK cover to stop the components getting marked during assembly.
Page 6
Ensure the drawer runner side with 2 holes for dowels part 04 is facing towards the top of the panel. TOP OF PANEL 28mm Ø4,5 GOLD 8 x 8 11 08 Z Z Z FRONT 10mm 35mm 40mm Ø4,5 Ø4,0 GOLD GOLD...
Page 8
Fixing drawer safety stops 1; Insert drawers into frame by approximately 50mm. 2; Push wooden dowels in through the pre-drilled holes close to the back of the drawer sides until they are level with the inside edge of the drawer sides. 3;...
Page 9
ADJUSTING HINGE 1ª 2ª 3ª 1ª 2ª 3ª IMPORTANT NOTICE Please avoid opening all drawers or doors simultaneously as this could cause your furniture to fall forwards. Where there is a risk of this occurring, especially in environments with children or uneven floors we recommend that this item of The RED sachet contains touch up furniture is attached to your wall using appropriate...