Advertisement
Quick Links
TX533
07
08
07
02
06
Core Products are proud to be a member of ACID (Anti Copying in Design).
Our designs are supported through their intellectual property databank.
All copyright, design rights & intellectual property rights existing in this product,
instructions and related documents are and will remain the property of Core Products.
We will treat any infringement of these rights seriously.
Copyright © Core Products 11/2021
01
19
19
04
19
04
04
05
18
11
04
19
04
04
17
19
19
06
16
10
15
14
3x
03
13
10
12
11
09
3x
Advertisement
Related Manuals for ACID TX533
Summary of Contents for ACID TX533
- Page 1 TX533 Core Products are proud to be a member of ACID (Anti Copying in Design). Our designs are supported through their intellectual property databank. All copyright, design rights & intellectual property rights existing in this product, instructions and related documents are and will remain the property of Core Products.
-
Page 3: Parts List
TX533 115min P3 Thank you for choosing this furniture. BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can acclimatise. PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY. Information about your Pine furniture. - Page 4 25mm Ø8 40mm Ø8 25mm Ø8 25mm Ø8...
- Page 5 Ensure the drawer runner side with 2 holes for dowels part 04 is facing towards the top of the panel. TOP OF PANEL 28mm Ø4,5 TOP OF PANEL GOLD Ensure the drawer runner side with 2 holes for dowels part 19 is facing towards the top of the panel. TOP OF PANEL 180º.
- Page 6 BACK 40mm Ø4,0 GOLD Ensure the drawer runner side with 2 holes for dowels Dowel to be pushed part 19 is facing towards the top of the panel. all the way through divider panel 17. TOP OF PANEL 28mm Ø4,5 GOLD...
- Page 7 8 x 8 35mm 40mm 10mm Ø4,5 Ø4,0 GOLD GOLD...
- Page 8 25mm Ø8 28mm Ø4,5 GOLD 30mm Ø3,5 BLACK GOLD...
- Page 9 30mm Ø3,5 GOLD 25mm Ø4,5 16mm GOLD Ø3,0 BLACK Fixing drawer safety stops 1; Insert drawers into frame by approximately 50mm. 2; Push wooden dowels in through the pre-drilled holes close to the back of the drawer sides until they are level with the inside edge of the drawer sides.
- Page 10 WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED). - Place fixing strip against the wall and mark position for drilling hole. - Drill hole in your wall to a depth of 30mm using a 6mm drill bit.