Page 1
CRG523 Core Products are proud to be a member of ACID (Anti Copying in Design). Our designs are supported through their intellectual property databank. All copyright, design rights & intellectual property rights existing in this product, instructions and related documents are and will remain the property of Core Products.
CRG523 110min P3 Thank you for choosing this furniture. BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can acclimatise. PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY. Information about your Pine furniture. Our pine furniture ranges have been carefully crafted from solid wood and wood fibre based composite boards.
Page 3
25mm 25mm 14mm Ø8 Ø8 Ø3,5 GREY 16mm 16mm Ø3,0 Ø3,0 BLACK BLACK 25mm Ø8...
Page 6
28mm Ø4,5 GOLD 180º 28mm Ø4,5 GOLD To avoid damage to your furniture during assembly please build on a soft clean surface such as the inside of the cardboard box. 28mm Ø4,5 GOLD...
Page 7
8 x 8 180º 180º GREY BLACK L-270 RIGHT GREY 16mm Ø3,0 BLACK 3/16 x 5/8 180º 14mm 16mm Ø3,5 Ø3,0 GREY GREY L-270 LEFT BLACK GREY 3/16 x 5/8...
Page 8
"Join drawer sides to drawer fronts with caution not to damage dovetail joints. Tap gently up and down the drawer side until fully inserted into drawer front." 16mm 30mm “Use a small Ø3,0 Ø3,5 drop of glue." GOLD BLACK GLUE 3/16 x 3/8 3/16 x 3/8 GREY...
Page 9
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED). - Place fixing strip against the wall and mark position for drilling hole. - Drill hole in your wall to a depth of 30mm using a 6mm drill bit.