Download Print this page

ACID CT110 Quick Start Manual

Download this manual

CT110

Core Products are proud to be a member of ACID (Anti Copying in Design).

Our designs are supported through their intellectual property databank.

All copyright, design rights & intellectual property rights existing in this product,

instructions and related documents are and will remain the property of Core Products.

We will treat any infringement of these rights seriously.

Page 1 CT110 Core Products are proud to be a member of ACID (Anti Copying in Design). Our designs are supported through their intellectual property databank. All copyright, design rights & intellectual property rights existing in this product, instructions and related documents are and will remain the property of Core Products.
Page 3 CT110 50min Thank you for choosing this furniture. BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can acclimatise. PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY. Information about your Pine furniture.
Page 4 25mm Ø8 25mm Ø8 Build your furniture on a soft clean cover to stop the components getting marked during assembly. 25mm Ø8...
Page 5 25mm Ø4,5 GOLD BACK BACK 25mm Ø4,5 GOLD ENSURE FRONT EDGE IS LEVEL 25mm Ø4,5 GOLD...
Page 6 ENSURE FRONT EDGE IS LEVEL 25mm Ø4,5 GOLD Ensure the drawer runner side with 2 holes for dowels part 04 is facing towards the top of the panel. 25mm Ø4,5 GOLD 8 x 8...
Page 7 25mm Ø8 25mm Ø4,5 GOLD 25mm 25mm Ø4,5 Ø4,5 GOLD GOLD...
Page 8: Important Notice
25mm Ø8 Fixing drawer safety stops 1; Insert drawers into frame by approximately 50mm. 2; Push wooden dowels in through the pre-drilled holes close to the back of the drawer sides until they are level with the inside edge of the drawer sides.