Advertisement
Reset, Status display (Continued)
Status display
Input
Video mode
Vertical frequency
ENTER
Factory reset mode:
Return the adjusting or setting contents on the menu
screen to the factory setting status.
Keystone reset:
The operating environment with vibration and/or shocks,
ENTER
etc. may prevents from performing the keystone distortion
correction normally. This may occur due to the change of
setting in the horizontal status. In this case, perform the
"Keystone reset".
Perform the setting with the projector installed on the
horizontal plane.
4
Press MENU several times until the full
MENU
menu screen disappears.
When performing "Factory reset mode" or "Keystone reset",
the menu screen disappears.
MENU
Note
Pressing the MENU button will return to the previous setting screen.
Video
Current input source
Video signal system
Signal vertical frequency
CONTENTS
53
Advertisement
