Threading The Chain Stitch Looper (Brown); Raise Presser Foot By Lowering Presser Bar Lifter To; Release Tension Discs; Pass Thread From Back To The Front Through The Thread Guide - Singer 14T968 Instruction Manual

3) Threading the Chain Stitch/Cover stitch Looper
Thread the chain stitch/cover stitch looper as indicated
1~11.

Raise Presser foot by lowering presser bar lifter to

release Tension discs.

Pass thread from back to the front through the
thread guide 1.
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
While holding thread with fingers, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the tension
discs 3.
(Brown)
2
3
20
10
11
9
2
1
2
3
4
5
6
7
8
1
3