Table of Contents
Advertisement
1. SELECTION OF STITCHES & AUTO TENSION
This machine is capable of producing various types of stitches according to the combination of Auto Tension
Selected, needle positions, threading methods, and the use of convertible right looper/spreader.
Stitch Type
1. Double
Chain Stitch
ATD: D
2. Two-thread
Wrapped Edge
Overlock
ATD: D
ATD: G
3. Two-thread
Overedge
ATD: E
4. Three-thread
Overlock
ATD: A
ATD: B
5. Three-thread
Flatlock
ATD: F
6. Three-thread
Ultra-Stretch
Mock Safety
Stitch
ATD: G
7.Four-thread Ultra-
Stretch Mock
Safety Stitch
ATD: A
ATD : Auto Tension Dial Selected
A 1-needle 2-thread straight stitch is used
for construction or decorative stitching.
Seams also can be sewn at desired
distance from edge of fabric by
disengaging the right looper and movable
knife.
1-needle 2-thread stitch is used for
seaming lightweight or stretch fabrics.
It is also ideal for rolled and blind hemming.
A 4 mm and 6 mm overlock seam width
can be obtained by changing the needle
position.
1-needle 2-thread stitch is used for
overedging common fabrics. It is also
ideal for flatlock (butted or lapped) seams
and blind hemming. A 4 mm and
6 mm overedge seam width can be
obtained by changing the needle position.
1-needle 3-thread stitch is used for
overedging and seaming on common
fabrics. A 4mm and 6 mm overlock seam
width can be obtained by changing the
needle position.
1-needle 3-thread stitch is used for
butted or lapped seams and ornamental
stitching with decorative thread. Also,
a 4 mm and 6 mm flatlock width can
be obtained by changing the needle
position.
2-needle 3-thread stitch that is ideal for
lightweight, extremely stretchy fabrics
such as tricot and spandex.
2-needle 4-thread stitch that is ideal
for medium to heavyweight stretchy
fabrics such as double knits and swim
Wear.
5
Reference
Page
39
41
42
43
44
45
46
Advertisement
Table of Contents
