Table of Contents
Advertisement
6) Threading the Cover Stitch Needles
(1) Threading the
Cover Stitch Left Needle
(Orange) (C on needle clamp)
Thread the cover stitch left / chain stitch needle as
indicated 1~9.
Raise Presser foot
to release Tension discs.
Pass thread from back to the front through the
thread guide 1.
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
While holding thread with finger, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the
tension discs 3.
by lowering presser bar lifter
3
2
25
1
2
3
6
7
5
4
8
9
1
2
3
Advertisement
Table of Contents
