Scsi Bus Conditions And Miscellaneous Features Supported - Seagate ST32151W Product Manual

48
9.4

SCSI bus conditions and miscellaneous features supported

Asynchronous SCSI bus conditions supported by the drive are listed below. These conditions cause the SCSI
device to perform certain actions and can alter the SCSI bus phase sequence. Other miscellaneous operating
features supported are also listed here. Refer to SCSI I/O Product manual P/N 77738479 for details.
Table 9: SCSI bus conditions and other misc. features
Condition/Feature Supported by:
SCSI-2/SCSI-3 Conditions or Feature
Y Attention Condition
Y Reset Condition
Y Contingent Allegiance Condition
N Asynchronous Event Notification
Y Arbitrating System
Y Disconnect/Reconnect
Y Asynchronous Data Transfer
Y Synchronous Data Transfer
N Synchronized (locked) Spindle Operation
N Differential Interface Circuits available
Y Segmented Caching
N Zero Latency Read
Y Queue tagging (up to 64 Que tags supported)
Y Deferred Error Handling
Y Parameter Rounding
Y Reporting actual retry count in Extended Sense bytes 15, 16 and 17.
N Adaptive Caching
Y Adaptive Read Look-ahead
[1] Flag and Link bits in Control Byte supported
Y Immediate status on Start/Stop command
Y Immediate status on Format unit command
N Immediate status on Synchronize Cache command
Y Format progress indication
SCSI-2/SCSI-3 Status Supported
Y Good
Y Check Condition
N Condition Met/Good
Y Busy
[1] Intermediate/Good
N Intermediate/Condition Met/Good
Y Reservation Conflict
Y Queue Full
Notes.
[1] Customer unique
Hawk 2XL Product Manual, Rev. B