Refrigerator Multi-Sensor
PAT13
-A/B/C/D
The refrigerator temperature sensor PAT13 has temperature and
door/window , 2 sensors function in one, based on Z-Wave
technology.
TM
It is the Z-Wave
plus product, it support the security, OTA... Those
newest features of the Z-Wave
communication protocol designed for home automation, specifically to
remotely control applications in residential and light commercial
environments. The technology uses a low-power RF radio embedded or
retrofitted into home electronics devices and systems, such as lighting,
home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave
TM
TM
technology. Z-Wave
is a wireless
with other Z-Wave
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
network system is all made by Z-Wave
network system will have the advantages as below.
Concurrent multi-channel support reduces external interference.
•
Better RF range, improve about 10 meters in indoor.
•
Support 100 Kbps transmit speed, speed up communication.
•
Specification
Rated
RF distance
RF Frequency
RF Maximum Power
Dimension
TM
Weight
IP classification
Operation temperature
Humidity
Magnetic gap
Temperature Detect Range
Cable type
Specifications are subject to change and improvement without
TM
network
notice.
1
TM
certified devices from other manufacturers and/or
TM
500 series chip, when your Z-Wave
TM
500 series devices. The
DC3V (CR123A)
Min. 40M indoor,
100M outdoor line of sight,
868.40 MHz, 869.85 MHz(EU)
908.40 MHz, 916.00 MHz(US)
920.9MHz, 921.7MHz,
923.1MHz(TW/SG/Thai/KR)
+10dBm (Peak), -10dBm (Average)
85(L)x 28(W)x23(H) mm
80g
IP20; indoor use
-10 to 40° C
85%RH max
25mm (open to close); 30mm (close
to open)
-30 to 80°C
28AWGx 4C OD: 3.0mm, 2 meters,
-40 to 80 °C
TM