MSI MS-6151 Manual page 92

®
2.2 Windows
You need to install Windows
®
Windows NT driver.
2.2-1 Display Driver Installation Procedure:
Step 1: Click Start menu and select Control Panel from Settings
group.
Step 2: Select Display icon.
Step 3: Select Settings on the Display Properties.
Step 4: Select Display Type.
Step 5: Select Change from the Adapter Type Area.
Step 6: Select Have Disk of Change Display.
Step 7: Insert the CD-Title Disk into CD-ROM Drive.
Step 8: When the Install from Disk dialog box appears, look for your
CD-ROM drive :\SVGA\ATI\3D_RAGE\WINNT\ati.inf.
Step 9: When the Change Display dialog box appears, click OK.
Step 10: When the Third-party Drivers dialog box appears, click Yes.
A message will appear stating that the drivers were succesfully
installed. Click OK. You must now restart Windows
NT 4.0
®
NT "Service Pack", before you install
4-5
®
NT 4.0.