Installation Of Hi-Therma Split Outdoor Unit - Hisense AHM-044HCDSAA Service Handbook

Installation
8.1.6 Installation of Hi-Therma Split Indoor Unit
8.1.6.1 MAIN PARTS (DESCRIPTIONS)
No. Part
Indoor unit
1
front panel
Indoor unit
2
surrounding panel
Master controller
3 &
controller frame
Piping
4
connections
8.1.6.2 REMOVING THE PANELS
If it is necessary to access to the indoor unit components,
please follow these operations.
8.1.6.2.1 Removing the front panel
The indoor unit front panel needs to be removed for any task
inside the indoor unit.
1. Unscrew 1 screw at the bottom of the indoor unit and 2
screws on the top of unit.
1
2
4
2. Remove the front panel.
3
1 Push the front panel upward.
●
Take care with the LCD display of the master controller while
removing the front panel.
● Be careful not to drop the front panel during operation.
● Take care when removing front panel, the parts inside the unit
could be hot.
8.1.6.2.2 Opening the electrical box
● Disconnect the unit from the power supply before
touching any of the parts in order to avoid an electric
shock.
Unscrew
48
2 Push the front panel forward,
disengage the snap, and front
panel can be removed.
release the front
panel.
*Handle on electrical box cover can be
used to hang the master controller.
3