Handlebar Switches - Yamaha WR250X 2007 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Resetting the distance-compensa-
tion tripmeter or the distance-com-
pensation tripmeter in combination
with the stopwatch
1
NOTE:
Resetting can be made only to the dis-
2 tance-compensation tripmeter or to the
distance-compensation
combination with the stopwatch.
3
Resetting the distance-compensation
4
tripmeter
1. Check that the stopwatch mea-
5
surement is in operation.
2. Reset the distance-compensation
6
tripmeter to zero by pushing the
"RESET" button for at least two
seconds.
7
Resetting the distance-compensation
8
tripmeter in combination with the stop-
watch
9 1. Stop the stopwatch.
2. Reset the distance-compensation
tripmeter and the stopwatch to
zero by pushing the "RESET" but-
ton for at least two seconds.
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the display will indicate a
two-digit error code.
tripmeter in
If the display indicates any error codes,
note the code number, and then have a
Yamaha dealer check the vehicle.
1. Error code display
CAUTION:
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

Handlebar switches

Left
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
1
ECA11590
3-8
EAU12347
1
2
3
/ "
/ "
"