233621 PEARL II PRO - ANC Wireless Bluetooth 5.2 Earbuds Manual

WHAT'S IN THE BOX

PRODUCT ILLUSTRATION

CHOOSE YOUR EAR TIPS

Ear tips (XS/S/M/L X2) The size S ear tips are attached to the ear buds in-box.

Note: Do not plug the ear buds into your ears without installing ear tips, as this may damage your ears.

WEAR DEMONSTRATION

After putting the ear buds into the ear, rotate and adjust the ear bud to the right depth and angle to fit the ear canal (as shown below).

USE THE TOUCH PAD

Use touch pad to control Music volume / Play / Pause, Pick/ Hang up /Reject call, Noise Cancellation on / off, Ambient on / off, and activate the Mobile phone's System voice assistant for conversation.

1. To avoid hurting your ears, please do not apply excessive pressure on the touch pad with your fingers (touch pad lightly);
2. To avoid damaging the touch pad, please do not click on it with any sharp objects.

TURN ON/TURN OFF

Turn On:

1. When the ear buds is in the charging box, Open the cover of the charging box
2. When the ear buds is not in the charging box, Press and hold the ear buds touch pad for 5S

Turn Of:

1. When the ear buds is in the charging box, Close the cover of the charging box
2. When the ear buds is not in the charging box, Press the ear buds touch pad three times and the third press hold

PAIRING

Pair and connect for the first time

1. Take out the ear buds from the charging case;
2. The LED on the ear buds flash red and blue alternately, and the ear buds enter pairing mode.

Note:

1. For the ear buds that are not paired for the first time, when connecting a new mobile phone, you need to open the cover of the charging box, Press and hold the function button for 2-8S, and the ear buds enter pairing mode.
2. When the ear buds is turned on, press the touch pad 5 times to enter pairing mode.

3. Find "233621 Pearl II Pro" on the Bluetooth list to pair the first ear bud;
   
4. Enjoy your Pearl II Pro.
   

Bluetooth remote disconnection and reconnect

1. If the ear buds are disconnected with the mobile phone and return to the effective connection range within 10 minutes, Bluetooth will automatically reconnect.
2. If the ear buds are disconnected with the mobile phone and return to the effective range after 10 minutes, Bluetooth needs to be reconnected manually.

Turn on to reconnect

After putting the ear buds back into the charging case, Close the cover of the charging box, and then open the changing box, the ear buds will automatically connect to a recently connected mobile phone.

To clear the pairing record of the unit

1. Open the cover of the charging box.
2. Press and hold the function button for more than 8S.
3. The LED on the ear buds flash red and blue alternately.
4. The pairing record is now cleared.
5. Open the charging box cover again and the ear buds will enter pairing mode

NOISE CANCELLATION MODE AND AMBIENT MODES

Cycle through Noise
Cancellation Mode ON,
Ambient Mode ON and ALL

Noise Cancellation Mode:
Our noise canceling technology and optimized passive isolation can suppress wide-band ambient noise.

Ambient Mode:
Allows you to hear sounds around you even while wearing the ear buds.

Note: The ear buds are set to Noise Cancellation Mode when powered on

CHARGE YOUR DEVICE

1. When the power of the ear buds is less than 10%, it will prompt "Battery low ". Put the ear buds in the charging box, the red light is always on, that is, charging.
2. When the Type-C cable is inserted for charging, the red indicator light of the charging box is always on.
3. When fully charged, the indicator light of the charging box goes out.

Note:

1. please connect the computer or use the charger certified by the regular manufacturer (output 5V / 1A or above)Charge and complete the charging in about 2 hours.
2. If the headset is automatically turned off due to insufficient power, please charge the headset as soon as possible, such as for a long time Failure to charge in time may result in failure to charge normally.

TOUCH FUNCTION

LED BEHAVIOR

Ear bud LED Behavior

1. When the ear buds put the box, the blue light flashes once;
2. When the ear buds enters pairing, red and blue flashes alternately;
3. When the ear buds is charging, the red light is always on;
4. When the ear buds is fully charged, the red and blue lights are off;
5. Clear the pairing record of the ear buds, red and blue flashes alternately;

Charging Case LED Behavior

Being Charged
Red light off: Battery power 100%
Red light always on: Battery power 1-99%

Not being charged
Open / Close the top cover of the charging case/Press the function button

Blue light flashing slow: Battery power 11-100%
Red light flashing slow: Battery power 1-10%
Red lights flash fast for 3 times: Charging box battery power is less than 1%, Please charge in time

SPECIFICATIONS

SAFETY AND HANDLING

1. Do not use this device in dusty, humid, dirty environment or places near magnetic field.
2. Keep an appropriate volume to avoid hearing damage.
3. Do not use this device while driving.
4. Keep the device away from heat sources like electric heaters, microwave ovens, stoves, water heaters, candles or any hot place.
5. Do not use a hair dryer or microwave to dry the device.
6. Please use the device and its accessories in 45°F~113°F/0°~45°C. When the environmental temperature is too high or too low, it may cause device stop working.
7. Keep the device and its accessories in a ventilated and cool place without direct sunlight.
8. This device is not a toy, and children must use this device under adult supervision.
9. This device and its accessories are not normal household garbage. Please deal with them according to the local laws and regulations.
10. Ear buds is designed to charge using standard Type voltage (5v +- 0,25v). It is not recommended to charge product using power supplies/sources with higher voltage.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download 233621 PEARL II PRO - ANC Wireless Bluetooth 5.2 Earbuds Manual