233621 HUSH - ANC Headphones Manual

What's In The Box

Right Earmuff Button/Interface Position

Light Indicators

Power on / off: white light turns off after 1 second
No device connected after booting: white light flashes quickly
During Bluetooth pairing: red and white lights flash fast
Bluetooth is connected: white light flashes slowly
Low battery: red light flashes quickly
Charging (0-99%): the red light is always on
Charging completed: white light is always on

Power On / Power Off

Power On: In the off state, press and hold the power button for 2 seconds to power on, the white indicator light flashes.
Power Off: In the power-on state, press and hold the power button for 2 seconds to power off, the indicator light will go out.

Pairing

1. Pair and connect for the first time
   1. When the headphone is off, Press and hold the power button for 2 seconds and the voice prompt "Power on" will be displayed. The red and white lights flash alternately, which means that the pairing state is entered. and you will hear a voice prompt "Looking for device".
   2. Turn on the Bluetooth on the phone and find "233621^® Hush" to connect.
2. Turn on to reconnect
   When the headphone is off, press and hold the power button for 2 seconds and the voice prompt "Power on" is accompanied by a white light flashing. And the headphone will automatically reconnect to the last device.
3. Re-pair
   1. When the headphone is on, press the power button for more than 5 seconds, the red and white flash, enter the pairing state, and the red and white lights flash with the prompt tone.
   2. Turn on bluetooth on the phone to connect.
4. Disconnect and reconnect the Bluetooth
   1. Manually disconnect and reconnect:
      1. The mobile phone end actively disconnects Bluetooth, the headset enters the connectable state, 15 minutes If there is no mobile phone connection in the clock, it will automatically shut down;
      2. The headset end actively disconnects Bluetooth, the headset enters the pairing state, if there is no mobile phone connection within 5 minutes, then exit the pairing state and enter the connectable state, If there is no mobile phone connection within 10 minutes, it will shut down.
         Note: Press twice the power button to achieve Bluetooth disconnection and pairable mode.
   2. Bluetooth connection when out of range.
      1. The headphone which was out of the Bluetooth range will automatically reconnect if it is back in the range, within 10 minutes of disconnection.
      2. After 10 minutes, the Bluetooth will have to be manually reconnected.
      3. After 20 minutes of disconnection outside the Bluetooth range, the headphone will power off.

Noise Cancellation Mode And Ambient Modes

Noise Cancellation Mode: Our noise canceling technology and optimized passive isolation can suppress wide-band ambient noise.
Ambient Mode: Allows you to hear sounds around you even while wearing the headphone.

Right Earmuff Touch Function

Charging

Voice Prompts

Power on: "Power on".
Power off: "Power off".
Pairing successful: "Audio connected".
Connection failure: "Audio disconnected".
Bluetooth pairing: "Looking for device".
Pairing failure: "Device not found".
Low battery: "Battery low"(<10%).
Noise cancellation on: "Noise cancellation on".
Ambient on: "Ambient on"
Noise cancellation, Ambient mode are off: "off". Sound Max: "Beep, Beep".

Call Function

1. When calling
   1. Press the right earmuff touch panel twice to answer the call.
   2. Press the right earmuff touch panel twice again to hang up the phone.
2. When the call is active
   1. Press the right earmuff touch panel twice to hang up the phone.
   2. Press the Function button button once / twice to adjust the volume.
3. Call switching
   1. Press the right earmuff touch panel twice to hold the current call and connect with the incoming call.
   2. Long press the right earmuff touch panel once to continue the current call and reject the incoming call.
   3. While the call is in progress, press the right earmuff touch panel twice to hang up the ongoing call.

Notice:
Some of the mobile phone brands and models may differ in operation. For queries contact sales for support.

Listen To Music

1. When music is paused
   Press the right earmuff touch panel twice to play the music.
2. When music is playing
   1. Press the right earmuff touch panel twice to pause the music.
   2. Press the Function button button twice to turn up the volume.
   3. Press the Function button button once to turn down the volume.
   4. Press the right earmuff touch panel three times to switch to the next song.
   5. Press the right earmuff touch panel once to switch to the previous song.
3. When there is an incoming call during music playback
   1. Music pauses automatically. Press the right earmuff touch panel twice to answer the call.
   2. Press the right earmuff touch panel again to hang up the phone and the music continues to play.

Notice:
Keep the headphone and the phone within the allowable range, preferably without obstacles. Otherwise the call and music playback quality may be affected or may disconnect.

Restore Factory Settings

When the headphone is on, press and hold the right earmuff touch panel and power button for 5 seconds at the same time. The red and white lights flash alternately twice, and after 5 cycles of flashing, the indicator goes off. That is to clear the pairing record and restore the factory settings. The previously connected phone needs to be re-paired to use.

Specifications

Type: 233621^® Hush
Speaker size: 40mm NdFeB speaker
Audio decoding: SBC
Frequency response range: 20-20kHz (Bluetooth)
Connection method: Type-C charging cable
Support mode: BT 5.0, HSP v1.2, HFP v1.6, A2DP v1.2, AVRCP v1.4
Bluetooth frequency: 2.402-2.480GHz
Bluetooth power: <8.0dBm
Battery specifications: Rechargeable polymer lithium ion battery 1200 mAh
Charging time: 2 hours
Headphone usage time: 70H (ANC ON)
Product weight: 225g