Datavideo PTC-305 Instruction Manual page 15

Please follow following steps for viewing the camera video from the web UI.

Connect the PTC-305camera directly to your PC/Notebook PC
1. Connect the PTC-305 to your PC or laptop by an Ethernet Cable.
2. Open the web UI by the connected PC or laptop and then please enter the
default IP address into the address bar of the web browser.
Note: The default static IP address of the PTC-305 is 192.168.100.100.
3. The login page of the web UI will be opened, please enter the user name
and password (the default user name and password are admin/admin).
4. Open the preview window for previewing the video which is shot by the
camera.

Connect the PTC-305 camera to your PC or laptop by a router.
1. Please set the Ethernet IP address of your PC or laptop as 192.168.100.x(x
means 0-255) and it will be at the same local area network as the PTC-305.
2. Please use an RJ-45 Ethernet cable to connect from the DVIP/POE port on
the rear panel of the PTC-305 to the LAN port of a router. And then please use
another RJ-45 Ethernet cable to connect from the RJ-45 Ethernet port of your
PC or laptop to the LAN port of the same router.
3. Please open the web UI from the connected PC or laptop and then please
enter the default IP address of the camera into the address bar of the web
browser.
Note: The default static IP address of the PTC-305 is 192.168.100.100.
4. The login page of the web UI will be opened, please enter the user name
and password (the default user name and password are admin/admin).
5. Click into the preview window on which the video will be displayed.
15