Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
Description: 70V/100V Surface Mount Indoor/
Outdoor Speaker Pair
Woofer: 6.5" (16.51cm) Injection-Molded
Polypropylene
Tweeter: 1" (2.54cm) Titanium Dome
Dimensions: 11.875"H x 8.5"W x 7.5"D
(30 x 21.6 x 19 cm)
Terminals: 12 gauge screwdown terminal
Grille: Powder Coated Aluminum
Bracket: Aluminum
Recommended Power: 10 - 100 watts RMS for low
impedance systems
Tap Settings: 7.5W, 15W, 30W, 60W (70V)
15W, 30W, 60W (100V)
6Ω Bypass
Sensitivity: 87 dB
Frequency Response: (+/- 3dB): 55Hz-20kHz
Unit Weight: 9 lbs. (4 kg))
Speaker care
These sealed construction speakers are made of durable
materials that need very little care. Occasionally wipe them
with a soft, damp cloth. Do not use any harsh detergents,
chemical solvents, or abrasive materials on your speakers, and
do not spray water or other liquids into the grilles.
10
Russound AW70V6mk2 70V Surface Mount Indoor/Outdoor Speaker Installation Manual
The Russound AW70V6mk2 Speaker is guaranteed against all defects
in materials and workmanship for two (2) years from the date of
purchase. During this period, Russound will replace any defective
parts and correct any defect in workmanship without charge for
either parts or labor.
For this warranty to apply, the unit must be installed and used
according to its written instructions. If service is necessary, it must be
performed by Russound. The unit must be returned to Russound at
the owner's expense and with prior written permission. Accidental
damage and shipping damage are not considered defects, nor is
damage resulting from abuse or from servicing by an agency or
person not specifically authorized in writing by Russound.
This Warranty does not cover:
• Damage caused by abuse, accident, misuse, negligence, or
improper installation or operation
• Power surges and lightning strikes
• Normal wear and maintenance
• Products that have been altered or modified
• Any product whose identifying number, decal, serial number, etc.
has been altered, defaced or removed.
Russound sells products only through authorized Dealers and
Distributors to ensure that customers obtain proper support and
service. Any Russound product purchased from an unauthorized
dealer or other source, including retailers, mail order sellers and
online sellers will not be honored or serviced under existing Russound
warranty policy. Any sale of products by an unauthorized source or
other manner not authorized by Russound shall void the warranty on
the applicable product.
Damage to or destruction of components due to application of
excessive power voids the warranty on those parts. In these cases,
repairs will be made on the basis of the retail value of the parts and
labor. To return for repairs, the unit must be shipped to Russound
at the owner's expense, along with a note explaining the nature of
service required. Be sure to pack the unit in a corrugated container
with at least three (3) inches of resilient material to protect the unit
from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for
a Return Authorization number. Write this number on the shipping
label and ship to:
Russound
Attn: RA# (Insert your RA number here)
1955 Wehrle Dr
Williamsville NY 14221
Due to continual efforts to improve product quality as new
technology and techniques become available, Russound/FMP, Inc.
reserves the right to revise system specifications without notice.
WARRANTY
Advertisement
Table of Contents
