Table of Contents
Advertisement
DETAILED CHANNEL SETTINGS
Automatic Channel
Scan
Proceed
Other
14
Select »Single Cable I« or »Single Cable II«
according to the type of single cable router
multi-switch in your antenna system, and
confirm with »
Automatic Channel
Scan
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
98
ENGLISH
«.
----------------------------------------------------
Single Cable I
– B y using a single channel router, a
maximum of 8 different devices can be
broadcast with the same cable.
Single Cable II
– B y using a single channel router, a
maximum of 32 different devices can be
broadcast with the same cable.
15
Depending on your selection of »Single
Cable I« or »Single Cable II«, 8 or 32 user
bands are displayed in the »Tuner« menu.
Note:
E xample setup is explained for 8 devices
7
via »Single Cable I«.
16
Select the required elements with »
»
«.
Λ
Tuner
Press »
« and with »
between »User band 1« and »User band 8«
and confirm with »
Band Frequency
press »
« select the band frequency with
»
«, »
«, and confirm with »
V
Λ
User Defined
You can set the band frequency yourself.
»When "User Defined" is selected in "Band
frequency", "User Defined" is displayed in
the Single Cabel I menu.
Enter the user defined frequency with
»1...0« and select »
board» and confirm with »
17
Use »
« or »
« to select »Proceed« and
V
Λ
confirm with »
« button.
– A utomatic Channel Scan menu shall be
displayed.
18
Select the first satellite displayed in the
menu with »
« or »
V
»
«.
19
Select »Satellite Status« as »On« with »
>
»
«.
«,
V
«, »
« select
V
Λ
«.
« .
« on the screen key-
«.
« and confirm with
Λ
<
«,
Advertisement
Table of Contents
