Table of Contents
Advertisement
PICTURE / SOUND SETTINGS
"Filmmaker Mode" - This function is auto-
7
matically activated as soon as a movie be-
ing watched is detected. By closing the PQ
blocks, the movie can be viewed with the
image settings set by the cinematographer
who shot the movie. In addition, the color
temperature is set to "Warm" and brightness
to 200 nits for a cinematic experience.
»Flesh Tone« – This function provides the
7
most accurate skin colour by adjusting the
brightness and saturation specific to the skin
colour.
»Film mode« detects and processes feature
7
films automatically for all channel sources.
So you always get the best picture.
This works for 480i, 576i and 1080i modes
in TV playback and for other channel
sources.
If "Film mode" is switched on for programs
that do not have a feature film signal, minor
problems may occur, such as a dull picture,
incorrect subtitles, or thin lines in the picture.
"Blue Stretch" - This function increases the
7
perception of brightness by increasing the
blue intensity of white and gray tones.
»Gamma« – This setting determines which
7
brightness value should be displayed for
which digital transmission value. Most
recordings are transmitted with a gamma
value of 2.2 (all Windows PCs and newer
PCs with a MAC operating system work
with this; older MAC systems and transmis-
sions without a color profile mostly operate
with a gamma value of 1.8).
"Game mode" - When activated, this func-
7
tion minimizes image latency to a minimum
(below 33ms) for a better gaming experi-
ence and to avoid lag problems when
playing games.
"PC Mode" - This function disables all
7
advanced picture settings and makes the
image behave as if viewed on a monitor.
»Color Transition Improvement« – This func-
7
tion provides smooth colour transitions by
eliminating content-related errors in colour
transitions.
---------------------------------------------------------
»MEMC« – Motion stabilization eliminates
7
judder effects in motion content, providing a
smoother viewing experience.
"HDMI RGB range" - This function sets the
7
black and white range of the TV to the
correct values according to the device con-
nected via HDMI.
»Low Blue Light« – This function reduces the
7
amount of blue light emitted from the LEDs,
allowing more natural light to be emitted
from the TV screen and reducing eye strain.
"Color space" - This function selects the col-
7
or space, allowing colors to be displayed in
standard or wide scale.
»Color Management System« – This func-
7
tion allows the brightness, contrast and tone
of the colours to be adjusted separately. It is
possible to adjust these settings separately
for red, green, blue, magenta, black and
yellow colours. With this function, advanced
settings can be made in very specific
contents
»11 Point White Balance Correction« – This
7
function makes precise color temperature
adjustment in different shades of grey.
When content containing shades of grey
is played on the screen, the red-green-blue
components of the grey tones can be pre-
cisely adjusted separately with this function.
Restoring factory defaults for picture
settings
1
To reset the changes made in the »Picture«
menu, press »
« to select»Reset to Default«
V
and confirm with »
2
Select »Ok« with »
the deletion and press »
or
select »Cancel« and press »
3
Press »
« to return to the previous menu,
a
H
press »
« to return to TV broadcast or
T
press »
« to return to Home menu.
«.
« or »
« to confirm
V
Λ
«;
« to cancel it.
ENGLISH
27
Advertisement
Table of Contents
