Beko B50 D 986 S User Manual page 96

Table of Contents

Advertisement

DETAILED CHANNEL SETTINGS
DiSEqC 1.0
– B y using a satellite or switch, broadcasts
can be received from up to four different
satellites at the same time.
DiSEqC 1.1
– B y using a satellite or switch, broadcasts
can be received from up to sixteen differ-
ent satellites at the same time.
15
Depending on your selection of »DiS-
EqC1.0« or »DiSEqC1.1«, 4 or 16 satellites
shall be displayed in the menu.
Note:
E xample setup explained with 4 satellites
7
via »DiSEqC1.0«.
16
Select a satellite from the »Automatic Chan-
nel Search« menu with »
confirm with »
17
Select the required elements with »
»
«.
Λ
Satellite Status
Select »On« with »
Satellite Selection
Press »
«, select the satellite you want
to scan with »
V
»
«.
Scan Mode
Select »Full« or »Network« with »
>
»
«.
Scan Type
<
>
Press »
«, »
« to select »Free Channels
Only« for free channels only, »Encrypted
Channels Only« for encrypted channels or
»All« for all satellite channels.
Store Type
<
>
Press »
«, »
« to select »Digital Channels
Only« for television channels only, »Radio
Channels Only« for radio channels or »All«
for searching both.
18
Use »
« or »
V
Λ
and confirm with »
96
ENGLISH
« or »
« and
V
Λ
«.
«,
V
<
>
« or »
«.
«, »
« and confirm with
Λ
<
« or
« to select »LNB Settings«
«.
----------------------------------------------------
19
Select the required elements with »
»
«.
Λ
LNB Power
»
« Select the LNB power »
button to select "13/18V" or "14/19V" and
confirm with »
« .
LNB Frequency
Press »
«, select LNB frequency used in
the satellite system with »
confirm with »
«.
DiSEqC Port
Press »
«.
– D iESqC Port menu is displayed.
Disable
DiSEqC A
DiSEqC B
DiSEqC C
DiSEqC D
Select »DiSEqC A«, »DiSEqC B«, »DiSEqC
C« or »DiSEqC D« to select the satellite
corresponding to the respective DiSEqC
positions in the satellite system.
Note:
If »Antenna Type«, »DiSEqC 1.1« is se-
7
lected, choose between »Uncommit 1« and
»Uncommit 16«.
20
Press »
« twice to return to »Automatic
a
Channel Scan«.
Note:
Make the settings described in steps 16 to
7
20 for other 3 satellites you want to scan.
«,
V
« or »
«
V
Λ
« or »
« and
V
Λ

Advertisement

Table of Contents
loading

Table of Contents