Advertisement
1-D Aircraft Installation
This child restraint is certified for use in aircraft
only when used with the internal harness
system. Use only on forward-facing aircraft
seats. Follow the instructions for vehicle
installation and section 6-E for routing the aircraft lap belt.
See section 3-C for installation but do not use the tether.
See section 6-E " Vehicle Seat Belts" and the instructions
below.
This car seat is NOT certified for use in aircraft
when used as a booster seat because aircrafts
do not have shoulder belts.
Contact the airline for their specific polices.
When installing the car seat, route the lap seat belt through
the proper path and buckle it in. Then, pull on the tail of the
belt so that the lap belt gets tight around the car seat.
Grab the sides of the seat at the belt path where the
lap belt is and move the car seat from side-to-side and
front-to-back. If it moves less than 1" (2.5 cm), it is tight
enough.
15
Advertisement
