Advertisement
Reason Mixer Mode
To control Reason's mixer, press the [Mixer] button (default). The button's LED is illuminated while the mode is selected and
the Reason mixer is controlled. Press [Mixer] at any time to go back to the Mixer track list view.
In the T4 display, track names for the current bank of 8 tracks are listed and the currently selected track is reversed.
View Reason's Mixer or Rack
Press [View] to toggle the Reason mixer in and out of view when Mixer mode is selected. Panorama continues to control the
mixer parameters even when the mixer in Reason is not in view.
Channel Volume & Pan
With mixer mode active, moving faders 1-8 will control the first 8 mixer channels in the Reason mixer. For each of the 8
channels, the track name is listed in the display and volume changes are displayed as you move a fader.
•
Fader 9 controls the channel corresponding to the currently selected track so as you change tracks, you can quickly
change volume while you are working.
•
The 8 encoders control pan for each of the corresponding channels.
Channel Sends
Pressing the display button labeled [Sends] assigns the encoders 1-8 to control up to 8 active sends for the currently selected
channel.
•
Press the display buttons labeled [On] or [Pre] to switch each of the sends for the current channel on/off by using the
encoders or switch pre on/off.
•
Press [Mixer] to exit.
EQ
The display button labeled [EQ] opens the EQ menu .
•
Enable the EQ by pressing the button labeled [On]. The top row of the encoders to the right of the display allow you to
control gain for each of the bands and the bottom row controls the frequency.
•
Press the display button [Q] to change the assignment for the two middle bands to Q. You can toggle back to frequency
using the same button.
•
Press [Mixer] to exit.
Dynamics
The Dynamics menu assigns the encoders to control Dynamics parameters for the currently selected channel. Press [Dynami]
to activate and [Gate>] to control the Gate parameters.
Press [Mixer] to exit.
Write
The 4th display button is labeled [Write] and activates the Reason write automation mode for the selected track.
4
Using Nektar Panorama T4/T6 with Reason
www.nektartech.com
Advertisement
