Advertisement
Reason and Panorama T4/T6 Working Together
The following pages focus on how Reason and Panorama T4/T6 work together. If you have been using Reason for a while, you
may not need any additional information but it's always a good idea to revisit Reason's extensive documentation to remind
yourself, how Reason's functions work.
Track Changes
To navigate Reason's tracks from Panorama T4/T6, press [Track-] to go to the previous track and [Track+] to go to the next
track. This is the same as using the arrow up/down keys on your computer keyboard.
Transport
The transport buttons give access to activate or deactivate the following transport functions: Cycle (loop), Rewind (in 1 bar
decrements), Forward (in 1 bar increments), Stop, Play, Record.
In addition the buttons double up with functionality that's accessed by holding down the [Shift] button. The chart below tells
you what each button and button combination does and how they behave.
Key Combination
[Cycle]
[Rewind]
[Forward]
[Stop]
[Play]
[Record]
[Shift]+[Cycle]
[Shift]+[Rewind]
[Shift]+[Forward]
[Shift]+[Stop]
[Shift]+[Play]
[Shift]+[Record] (Mode)
Soft Take-Over
As you control different parts of Reason with the same fader controls you would normally experience parameter jumping. This
is what happens when a fader's physical position, is not the same as the position of the parameter you are controlling.
To avoid parameter jumping your Panorama T4/T6 is equipped with Soft Take-Over. This means that if a control is not in sync
with a parameter, moving the control will not cause a change, until it's position matches the value of the parameter.
Soft-Take-Over can be switched on or off by pressing [Shift]+[fader button 9] or you can temporarily override it by holding
[Shift] when moving a fader.
www.nektartech.com
Description
Switch the loop/cycle between the Left and Right locators on/off
Rewinds in steps of 1 bar. Press and hold for fast rewind
Forward in steps of 1 bar. Press and hold for fast forward
Stop playback
Activate play
Activate record
Goto Left locator
Set Left locator to the current song position
Set Right locator to the current song position
Undo last changes
Switch the Click/metronome on/off
Toggle Q Record on/Off
Using Nektar Panorama T4/T6 with Reason
3
Advertisement
