Advertisement
Nektarine Browser Tags
As the library of patches expands in the Nektarine browser it quickly becomes essential to be able to
narrow options. Tags can be selected in Nektarine's GUI for this purpose, but also from Panorama T4/T6.
1. Press the button labelled [Setup/Menu0 to view the tags page on Panorama T4/T6. The display now
shows a page with active tags, if any are selected.
2. E1 is by default assigned to select 'Plugin'. Rotate E1 to select a plugin. To confirm the selection,
press the display button labelled [Select].
3. Tags can be set by using the 8 encoders. Press and hold the display button labelled [Type] and move
an encoder (E2 for example).
4. Select 'Category' and release the button.
5. Move the same encoder again. This time it will scroll through available Categories.
6. With a 'Category' displayed, press the display button labelled [Select].
7. Press the [Patch] button to go back to the patch list. It has now updated to only show patches for the
plugin and category you selected in the tags page.
You can select up to 7 tags directly from Panorama T4/T6 using encoders 1-7. The 8th encoder is
permanently assigned to Group Tags which is like a preset of tags that you can create for instant access.
To exit browse, press the [Browse] button again or press one of the mode buttons.
www.nektartech.com
Using Nektar Panorama T4/T6 with Reason
13
Advertisement
