Dahua Lite DHI-XVR4104/08/16HS-S2 Instruction Manual page 24

Step 1
Loosen locking screws anticlockwise and remove the pedestal.
Step 2
Confirm the installation location and dig holes on the installation surface.
Step 3
Use tools to insert expansion bolts into the installation holes and fix them firmly.
Step 4
Adjust pedestal location (if it is side cable outlet, then pull the cable through the side outlet
cable slot). Align the bolt fixing holes of the device pedestal with the expansion bolt fixing holes
of the installation surface; insert the self-tapping screws into the expansion bolts and fasten
them firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable
through the outlet hole on the installation surface after the pedestal is fixed firmly).
Step 5
Put the enclosure and dome body into the pedestal, insert locking screws clockwise and fix
them slightly; rotate enclosure and dome body to a proper monitoring location; finally fasten
the locking screws firmly.
So far the device installation and cable connection are completed; you can check the
monitoring image via back-end coding device.
10