Installation For Model B - Dahua Lite DHI-XVR4104/08/16HS-S2 Instruction Manual

of the installation surface; insert the self-tapping screws into the expansion bolts and fasten
them firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable
through the outlet hole on the installation surface after the pedestal is fixed firmly).
Step 5
Rotate the decoration ring and fix it slightly, rotate the enclosure and dome body to a proper
monitoring location; connect the video output port of device cable to back-end encoding device,
and connect power port to power; adjust lens focal length to make image clear via focus tool
after the image is displayed on the back-end coding device; finally rotate the decoration ring
firmly.
So far the device installation and cable connection are completed; you can check the image
via back-end coding device.

3.2 Installation for Model B

Figure 3-2
Step 1
Press the button to loosen the pedestal. Press the dome enclosure under the outlet location to
separate the pedestal from the enclosure. See Figure 3-3.
6